3-PHASE/1-PHASE POOL PUMPS W/O PRE-FILTERS
Technical Specifications of 3-Phase/1-Phase Pool Pumps
Self-priming Pool Pump without Pre-filter
Original pump connectors included.
Can be used in Salt Water applications.
Available in models within the range of 0.75 hp to 3.00 hp.
Motor by Arçelik.
Connection: 3-Phase / 1-Phase
Things to Remember When Using Pool Pumps;
Any piping connection for priming and pumping must comply with the suggested dimensions. Before commissioning any pumps with higher flow rates, pump cycle must be ensured having adjusted the output valves at a sealed or half-open position and opening these valves fully after 5 seconds.
Pump’s priming valves cannot be sealed during the operation. When commissioning the pump, it must be ensured that the pre-filter is fully filled with water before starting the pump. The pump shouldn’t be operated in a dry state even for testing (rotational direction assessment) purposes.
The location where the pump is installed shouldn’t be a humid place, the motor of the pump cannot be in contact with water. The recommended priming height of the pump is no more than three meters.
Pump must be placed in a way making it possible for the cooler to have uninterrupted air flow.
Otherwise, this may cause overheating and failure of the system in a short time. The recommended max. speed for pump’s priming lines is 1.5m/s and max. speed for pump’s feed lines is 2.5 m/s.
Find Out About Our Other Discount Pool Pump Products Here.